This is default featured slide 1 title
This is default featured slide 2 title
This is default featured slide 3 title
This is default featured slide 4 title
This is default featured slide 5 title

Monthly Archives: September 2016

Textured Interior Paint

Inside paint is accessible in an assortment of sheens and hues to fit each utilization, notwithstanding, commonly one may think that its important to add surface to a divider in the space to add profundity and advance to a space. Finishing a divider can be effectively done independent from anyone else, utilizing present day and progressed finished paints and utilizing particular painting systems.

This article gives a knowledge in finished divider paints to make selecting surfaces simpler and fizzle confirmation.

Sorts of Textured Paints :

Surface sorts fluctuate in a scope of fine to coarse. There are various divider painting finished plans for both dividers and roofs that can make any room emerge.

Smooth texture paint has a lighter surface that gives an unpretentious impact.

Sand texture paint gives an additional substantial bodied complete which makes dividers additional abrasive.

Knockdown texture is intense and gives extraordinary impact when painted over with for all intents and purposes any shading.

Popcorn texture is overwhelming and has sound ingestion qualities bringing acoustic impacts when connected on roofs.

Creating Artificial Finishes using wall texture:

The exciting thing about adding textured wall paint to walls is being able to create faux finished by manually apply the texture. All one has to do is start by applying a base coat, then playfully create finishes with one or more accent colors, using anything from a sponge, paper, comb or so on. Latex and alkyd-based paints are widely used to apply accent colors to textured wall paints.

Try any of these great techniques which are simple to DIY and give great faux finish results when wall painting textured designs!

Comb Texture: A wide mouth comb can be easily used to create criss-cross, checkerboard, curvy lines or twirl patterns in wet paint.

Rag Wriggling: Dipping a rag in accent paints and wringing out the excess into a ball to roll over the wall is a fun way to create artistic finishes.

  • Try different materials give different looks and textures.
  • changing direction and redoing areas numerous times for deeper impact.

Marble finish: Using Plastic sheet against on wet base paint to create a marbled pattern or to create different patterns by folding or wrinkling the sheet.

Sponging: The coolest of all DIY texture techniques is to soak sponges in the paint to create random, textured wall pattern. Different sponge shapes and hardness can bring out numerous interesting texture designs.

Textured wall paints application – Tips & Tricks :

  • Applying Smooth eggshell or satin paint over textured walls helps highlight the complexity of the textured wall paints.
  • Existing textures wall paints need to be removed to applying new texture.
  • Practice wall painting textured designs on a board to get the hang of the pattern you wish to apply.
  • Smooth texture paint for walls can be used on both walls and ceilings.
  • Texture additives may be required for oil-based and latex paints.
  • One can use the technique of spraying texture paint as its easier to apply and economical.
  • To apply textured wall paints over a large area one can make use of a stencil roller, which can be rolled across the wall with ease.

Textured wall paints can add a dimension to space, creating depth and perception, to make the room interesting. With the new age advanced anti-microbial and wall protecting textured wall paints, the attractive walls are not only ravishing and elegant but also durable.

Wall Painting Tips

Divider painting all alone is an undertaking which can be both fun and energizing on the off chance that one has incredible divider painting thoughts. Feeling comfortable around divider paints can make any divider paint work effective and give astonishing outcomes. This likewise maintains a strategic distance from the requirement for rehashes and disappointing snapshots of fouling up.

Here are couple of valuable divider painting tips to recollect when applying divider paint hues 

Clean before beginning

To permit divider paint hues to hold fast well to dividers, clean filthy, sleek surfaces as the paint will chip or peel off. Tidy and wash dividers to ensure surfaces are clean and oil free for best and strong outcomes. Tape edges and trims for a neater wrap up.

Buying samples

Never buy wall paint colors for the whole house before trying and testing the shade in real light over a less prominent wall or on a board. Sample sizes are available at reputed retailers for one’s needs.

Mixing wall Paint

When wall painting a room or several rooms using the same shade, mix several cans of paint in a large bucket for a consistent color all over the room. If you mix separately each time it runs out, the color may vary slightly in each application.


A quick coat of primer is all it takes to eliminate dull, flashing and texture differences that occur when one covers crack and patches in the wall. Primer seals the patch so paint does not sink in to give a dull appearance.

Begin at the Trim

Professionals follow a certain order when painting a room. Contrary to normal belief the trim is painted first, then the ceiling, then the walls. In case the trim paint splatters onto the walls, one can cover it later when painting the walls.

Roll paint for consistent texture

Wall painting job needs clean edges and precision to bring out the best in the paint colors. The corners and enclosed areas in the wall painting design, where the brush is difficult to reach, one can find noticeably different texture. This should be retouched with a roller to ensure consistency.

Avoid lap marks

Lap marks are ugly stripes caused by the uneven layering of paint colors. They occur when one paints over an already partly dry color. The key to avoiding lap marks is to maintain a “wet edge,” overlapping strokes before the paint can begin to dry.

When wall painting a large section roll a nearly dry roller in diverse directions along the dry edge, this called ‘feathering out the paint’ as you go. For the second coat, apply the paint in the opposite direction. This overlapping paint application sharply reduces lap marks.

Smooth Finishing

To avoid a grainy texture in wall painting design, sand the trim before applying each coat of paint. After each sanding, vacuum or dust the trim then wiping it down remove the dust to avoid grainy texture.

One can get expert help in finalizing wall painting ideas and even apply wall paint colors at many reputed contractors at a cost. Wall painting on your own can also give professional results if one is patient and follows these tips to get amazing results.


Know what Makes Office Interior Design Important

The way in which you beautify your home or office is an impression of your identity. The best office interior design will reveal to you that powerful office inside outline will support efficiency and make your work environment inviting and warm.

The correct utilization of color, light and furniture all affect the state of mind of representatives. Envision sitting in a similar work area consistently for ten hours in a row, gazing at dark dividers in a dim room! Who wouldn’t have any desire to change that?

Many studys has demonstrated that the utilization of hues can invigorate you or quiet you, contingent upon what you require and soon thereafter. Yellow can invigorate inventiveness and make you can rest easy, yet in the event that you were to utilize a lot of red, it can bring about some anxiety, so utilize it suitably for the correct impact. Gentle hues like blues can quiet you and relentless nerves, so you could utilize them as well, in specific spots. On the other hand, in the event that you don’t need an excessive amount of shading, you could presumably keep nonpartisan shades like beige, however get flies of shading through intriguing divider workmanship, some additional pads in computerized prints or rich covering to make you feel warm and comfortable.

Use light appropriately. If the light is too strong it harms your eyes but if is too dim, you may not be able to work efficiently. You could use dimmers or task lights for the right impact. Adequate light boosts productivity.

Furniture plays an important role when it comes to work. Office seating should be ergonomic and comfortable. Gone are the days when office seating meant hard wooden/metal chairs; today’s chairs are ergonomically designed to provide the right backrest and comfort.

Office layout, as the best office interior designers will tell you, is no longer limited to cubicles but are more open, with plenty of breakout areas such as lounges and bean bags to relax. A fancy coffee vending machine, a magazine nook or a tiny library with some comfy chairs should make the office feel more inviting and less stressful.

Yet another important aspect of office interior design is greenery. Who said offices should be concrete jungles that turn into heat islands! You can make use of vernacular architectural concepts to make offices energy-efficient. The use of natural materials, skylights, a central courtyard with lots of natural light and air can all make your office a nice place to work.

The best office interior designers will suggest placing some potted plants in the office. Plants filter the pollutants in the air and boost indoor air quality. Plants also make your office space look appealing to the eye. A nice vertical garden on one of the exterior walls of the office can also lend a magical green touch to the workspace.

You could also embellish your office with interesting graffiti and social media motifs to make the workplace jazzy and modern.